|
WASP 2 H20 SPECIFICATIONS
|
Max Thrust: |
18-20 lb |
8.1-9.07 kg |
|
Engine weight: |
2lb |
950 gr |
|
Engine weight with starter: |
2.4lb |
1090 gr |
|
Max RPM: |
148,000 RPM |
|
|
Fuel consumption @ max RPM: |
261 ml/min |
204 gr/min |
|
Diameter: |
3.78 in |
96 mm |
|
Length: |
6.69 in |
175 mm |
|
Length with starter: |
9.64 in |
245 mm |
The Wasp 2 H20 is a factory-built version of the Wasp 1 H20 sold as a complete unit ready to run. It is ideal for those using the 12-18lb engine range and require something with a little bit more power for a similar engine weight.
Click on this link for some photos of the engine parts http://s6.photobucket.com/albums/y231/paulj1969/wasp/?
ENGINE PACKAGES
The Wasp 2 can be purchased in one of two forms:
|
 |
|
1) ENGINE ONLY
This is an engine-only system with no extras.
- The engine is factory assembled and fully tested, starter motor is extra
- The compressor nut contains a ring magnet for hall effect RPM sensors, and also a cross drilled hole for if you prefer to use infra red speed sensors
£999.00 |
|
 |
|
3) ENGINE WITH FULL AUTOSTART
This package comes complete with:-
- Factory-built and fully tested engine with autostart motor
- Mounting clamps
- Autostart ECU
- Fuel pump
- Fuel and gas solonoid valves
- Operation manual
- Fuel tubing
- Custom-made transit case
£1425.00 |
These prices will be held this low for a limited time only. Early ordering with 50% deposit will secure your engine at this price. | 
