WASP 1 H20 SPECIFICATIONS

When correctly constructed:

Max Thrust:	18-20 lb	8.1-9.07 kg
Engine weight:	2 lb	950 gr
Engine weight with starter:	2.4 lb	1090 gr
Max RPM:	148,000 RPM
Fuel consumption @ max RPM:	260 ml/min	200 gr/min
Diameter:	3.74 in	95 mm
Length:	6.69 in	175 mm
Length with starter:	9.64 in	245 mm

The Wasp 1 H20 is specially designed as a homebuild engine. The complete kit comes with a comprehensive and detailed Drawings and Instruction Manual which gives full instructions for the construction of each and every part of the engine. The construction manual can be purchased seperately and delivered by post or emailed as a PDF.

If you do not wish to make the parts yourself, you may purchase them either individually or as a set. All parts are fully machined and ready for assembly. The price list of parts are as follows:

	Item	Catalogue No.	Price £                 US$
	Construction Manual acrobat PDF copy Printed copy	W1-1001 W1-1001a	20.00       35.00  25.00       45.00
	Intake belmouth	W1-1002	30.00       53.00
	Intake outer ring	W1-1003	20.00      33.50
	Diffuser	W1-1004	90.00    160.00
	Shaft	W1-1005	65.00     115.00
	Compressor nut	W1-1006	6.50       11.50
	Compressor	W1-1007	75.00     133.00
	Compressor spacer	W1-1008	5.00       9.00
	Turbine spacer	W1-1009	5.00      9.00
	(a) Unmachined turbine casting   (b) Machined turbine casting	W1-1010       W1-1011	100.00  177.00       120.50  212.50
	Turbine nut	W1-1012	5.00         9.00
	Shaft tube	W1-1013	40.00      71.00
	Rear bearing carrier	W1-1014	8.50        15.00
	Front bearing carrier	W1-1015	8.50        15.00
	Bearing pre-load spring	W1-1016	2.50         4.50
	Combustor spring	W1-1017	2.50         4.50
	(a) Unmachined NGV casting   (b) Machined NGV casting	W1-1018       W1-1019	90.00       160.00       110.00     195.00
	Ceramic Bearing (each)	W1-1020	45.00      80.00
	Fuel manifold	W1-1021	40.00      70.00
	Festo Fuel filter	W1-1022	5.00        9.00
	Combustor assembly	W1-1023	100.00  177.00
	Set of 8 burners	W1-1024	30.00      53.00
	Annodised aluminium casing with steel gasket	W1-1025	65.00    115.00
	(a) One-piece machined jetpipe without centre cone   (b) Centre cone	W1-1026       W1-1027	40.00      70.00       10.00      18.00
	Screw package	W1-1028	10.00      18.00
	Festo fittings (each)	W1-1029	3.00         5.50
	Mounting clamps	W1-1030	15.00      26.50
	Casing ‘o’ ring	W1-1031	1.00         2.00
	Hall sensor screws	W1-1032	3.00        5.50
	Starter motor                including motor, clutch, mounting screws and casing	W1-1033	90.00    160.00
	Glowplug with extracted element	W1-1034	5.00         9.00
	Autostart ECU without solonoid valves	W1-1035	169.00  300.00
	Solonoid valves (each)	W1-1036	50.00      88.50
	Flight works fuel pump	W1-1037	75.00      133.00
	4mm Nylon Fuel tube per metre	W1-1038	2.00         3.50
	EGT Thermocouple	W1-1039	15.00      26.50

The complete kit package comprising all parts required to build a Wasp 1 engine is priced at ONLY £899. This introductory offer is for a limited time only. Place your orders early to avoid disappointment.

* Please note that this package DOES NOT INCLUDE starter motor, fuel pump, valves or ECU.